Sorting
The Sorting tab enables you to define the order and direction of the cuts.
Cutting Method
The Cutting Method list defines working methods. The following option are available in this:
Zigzag
When the Zigzag option is chosen, the machining direction changes from cut to cut. The tool performs the machining of a cut in the specified direction, then moves to the next cut and machines it in the opposite direction.
One way
When the One way option is chosen, all cuts are machined in the same direction. The tool performs the machining of a cut in the specified direction, then moves to the start of the next cut and machines it in the same direction.
Spiral
With the Spiral option, SolidCAM generates a spiral tool path around the drive surface according to the chosen pattern. The spiral pitch is defined by the Max. Step over parameter.
|
The Spiral option is available only when Strategy is set to Around on the Geometry page. |
Direction
The Direction for closed cuts/Direction for one way machining option enables you to define the following direction of cuts.
The Clockwise option enables you to perform the machining in the clockwise direction.
The Counterclockwise option enables you to perform the machining in the counterclockwise direction.
|
The option of Direction for closed cuts is available only when Zigzag is selected as the Cutting method. |
Start point
The Start point option enables you to define a new position of the start point of the first cut.
|
In Rotary Finishing, the Start Point option is available only with limited options and only when Strategy is set to Around rotary axis on the Geometry page. |