Mirror

The Mirror option enables you to create a mirror image of the tool path by reflecting it symmetrically around any selected axis and base point.

Click Mirror button to display the Toolpath mirroring dialog box.

Select Use toolpath mirroring check box to enable the options of Axis/Direction and Base point.

Orientation

The mirror plane on which you can mirror the tool path is defined using an axis and a base point.

Plane normal – The option of Plane normal has the options of  X-axis, Y-axis, Z-axis and User-defined.

Base point – Click to select the base point of the plane.

Keep mirrored toolpath only

Keep mirrored toolpath only check box enables you to display only the mirrored tool path. If this check box is not selected, the original and mirrored both tool paths are displayed.