Parameter Name |
Description |
PRP
Name |
| Compensation
By Zero (Milling only) |
Indicates
whether the tool-radius compensation is zero (YES) or tool radius
(NO). |
comp_by_zero_tool |
| Compensation Rough Passes (Milling
only) |
Default
value for Compensation Exists parameter on rough passes. |
-- |
| Compensation Finish Passes (Milling
only) |
Default
value for Compensation Exists parameter on finish passes. |
-- |
| Compensation Clear Offset Passes (Milling
only) |
Default
value for Compensation Exists parameter on clear offset passes. |
-- |
| Arc Exist as Default (Milling only) |
Default
value for Support Arcs parameter. |
arc_exist |
| Software Transform |
Indicates
whether the tool path coordinates of transforms are calculated
by software (YES) or generated by origin shifting (NO). |
-- |
| Finish Retreat (Turning only) |
Indicates
whether the finish process of the machine cycle retreats to the
start point (YES) or remains at the last point (NO). |
finish_retreat |
| Semi Finish Retreat (Turning only) |
Indicates
whether the semi-finish process of the machine cycle retreats
to the start point (YES) or remains at the last point (NO). |
semi_finish_retreat |
| Compensation On Rough With Cycle (Turning
only) |
Defines
whether or not cutter wear compensation can be used in the rough
process of the machine cycle. |
-- |
| Use Turning Cycle as Default |
Default
value for Turning Cycle parameter. |
turning_cycle_dflt |
| Use Groove Cycle as Default |
Default
value for Groove Cycle parameter. |
groove_cycle_dflt |