Compensation Definition
This subheader enables you to define the support of tool-radius compensation and how it is managed by the machine.
Parameter Name |
Description |
PRP Name |
Compensation Exists | Defines whether or not the machine has tool-radius compensation capability. | comp_exist |
Compensation Needs First Line | Tool position at the start of the first block, when the tool-radius compensation is activated. |
comp_x_start |
Smallest Movement (mm or inch) | The smallest value of line movement to start compensation. | zero_value |
Min Delta Arc Rad (mm or inch) | When compensation exists, each arc radius must not be smaller than the tool radius plus this value. |
min_delt_arc_rad |