Pos to Mach No Definition
This subheader is only available for machines that have posts written in the old style (Pos to Machine = NO).
Parameter Name |
Description |
PRP Name |
Tilt Axis With Deviation Angle | Plane definition with deviation angles (for GCode generation only). | tilt_axis_dir_CW-CCW |
Tilt Axis Dir CW & CCW | Enables choosing opposite angle pairs in operations (for GCode generation only). | tilt_axis_dir_CW-CCW |
Tilt Axis Direction | Defines the direction in which the 5th Axis tilts the workpiece (for GCode generation only). |
tilt_axis_dir |
4x Direction | Defines the direction of 4x rotation on wrapped operations (for GCode generation only). |
direction_4x |
4x Direction - Positive Only | Defines the rotation direction of 4x Simultaneous operations to be positive (for GCode generation only). |
positive_4x_dir_only |
Set Direction | Enables GCode that uses C-Axis of machines with 4th Axis (CW/CCW). |
set_dir |
MAC Number (Center of Rotation) | Home number that is the center of rotation movements during transformation. |
center_rot_mac_num |
Default Machine Plane | Default machine plane for home definition. | machine_plane |
The example below represents the correct Tilt Axis Direction according to the machine’s Kinematic and First Angle Pair Interval.
Kinematic |
First Angle pair interval |
Axial angles |
Spatial Angles |
||
AC |
Negative (-115,0) | CCW |
x_angle_const_y; z_angle_const_y; dev_angle_y |
CW |
rotate_angle_x; rotate_angle_y; rotate_angle_z |
AC |
Positive (0,115) | CW |
CCW |
||
BC |
Negative (-115,0) | CW |
y_angle_const_x; z_angle_const_x; dev_angle_x |
CW |
|
BC |
Positive (0,115) | CCW |
CCW |
||
AB |
Negative (-115,0) | CCW |
x_angle_const_z; y_angle_const_z; dev_angle_z |
CW |
|
AB |
Positive (0,115) | CW |
CCW |
For more information about system variables such as those shown in the above table, refer to the SolidCAM GPPTool Help documentation. |