Coolant

This tab enables you to define the tool coolant options that will be used for the current operation.

Turret coolant

This page enables you to choose the coolant options for the chosen turret.

Machine coolant

This page enables you to choose the coolant options for the CNC-Machine.

If specified in the Tool definition, the default Coolant options are automatically applied to the chosen tool but can be changed for each operation.

The coolant options available for use for the chosen turret and on the current CNC-Machine, according to the Machine ID settings, are marked with the icon.

The coolant options not available for use for the chosen turret and on the current CNC-Machine, according to the Machine ID settings, are marked with the icon.

All the existing coolant types are listed with corresponding check boxes to enable or disable any of the available options.

Apply coolant to all related operations

This command enables you to apply the selected tool coolant to all related operations of the CAM-Part. The application of tool coolant to all related operations is confirmed with the below message.