Internal / External Corner Cycles

The Internal and External Corner cycles are defined with the following parameters:

Approach/Retract

• The Distance along axis X is measured from the contact surface along the X-axis.
• The Distance along axis Y is measured from the contact surface along the Y-axis.

Modify geometry

• The Offset value defines an additional offset from the contact points on both surfaces.

Levels

• The Z-level value defines the Z-coordinate of the contact point. The selection button enables you to select the point directly on the model by using the Pick on plane dialog box.

Distances

• DX1 defines the distance in X axis between the vertex of the corner and first contact point .

• DY1 defines the distance in Y axis between the vertex of the corner and first contact point.

• DX2 defines the distance in X axis between the first and the second contact point.

• DY2 defines the distance in Y axis between the first and the second contact point.

• DX2 and DY2 distances are available only on selection. This pair of distances is optional.

Repetitive touches

• This field enables you to define the number of touches in each contact point.