Turret Options
In the Options section, you can define the turret capabilities that are later displayed in the Tool parameters.
Option to handle Device Dwell |
NONE/VALUE |
|
Option to handle Turret Air Coolant by GCode function |
NONE, ON/OFF |
|
Option to handle Turret Mist Coolant by GCode function |
HIGH/LOW/OFF, NONE, ON/OFF, VALUE/OFF |
|
Option to handle Turret Flood Coolant by GCode function |
HIGH/LOW/OFF, NONE, ON/OFF, VALUE/OFF |
|
Option to handle Device Air Coolant Through Spindle by GCode function |
NONE, ON/OFF |
|
Coolant Through Tool |
Option to handle Turret Coolant through Tool by GCode function |
HIGH/LOW/OFF, NONE, ON/OFF, VALUE/OFF |
Min Quantity Lubrication |
Option to handle Minimum quantity of Lubrication by GCode function |
NONE, VALUE/OFF |
Option to handle Device Spindle Rotation Direction by GCode function |
NONE, CW/CCW, CW/CCW/OFF |
|
Option to synchronize the turret spindle with other device’s spindle by GCode function |
NONE, ON/OFF |
|
Option to synchronize the turret axes with other device’s axes by GCode function |
NONE, ON/OFF |
|
Option to handle Tool Measuring of the tool mounted on Turret by GCode function |
NONE, YES/NO |
|
Check Tool Breakage |
Option to check if the Tool is damaged by measuring its radius and/or length |
NONE, VALUE |
Spindle Orientation |
Option to handle Turret Spindle positionby GCode function |
NONE, ON, ON/OFF, VALUE/OFF |
Reverse |
Option to rotate the turret by 180 around the motion direction |
NONE, ON/OFF |