Adjacent passes connection
This option enables you to define the connection method for adjacent cutting passes generated using the Clear offset method with the Zigzag option.
The following options are available to define the passes connection:
Linear
With this option, the tool movement from one cutting pass to the next is performed as a straight line connecting the end point of the first pass with the start point of the next pass. |
 |
Rounded
With this option, the tool movement from one cutting pass to the next is performed as an arc tangential to the adjacent cuttings passes. The arc connects the end point of the first pass to the start point of the next pass. |
 |
Use Lead-in\Lead-out
With this option, the tool moves from one cutting pass to the next with the link defined in the Lead-in\Lead-out sections.
Related Topics