Levels page
This page enables you to specify the Z-levels at which the tool movements and the operation are executed.
Start level, Clearance level and Safety distance.
Milling levels
The Multi-depth operation enables you to define the Upper level, Lower level (Drill depth) and Delta parameters using the solid model data.
Drill depth
This parameter defines the final depth of the drilled hole.
Depth type
This option enables you to deepen a drilled hole in order to obtain a given diameter at the specified drill depth.
Cutter tip
The drill tip reaches the defined drilling depth.
Full diameter
The drill reaches the defined drilling depth with the full diameter.
Diameter value
The drill reaches the defined drilling depth with the drill cone diameter specified by the Diameter value parameter.
The Diameter value can vary from 0 all the way up to the drill tool diameter. A value greater than the drill tool diameter is automatically decreased to the drill tool diameter. |