Quick SolidVerify tab

This tab enables you to define the Updated Stock parameters and options relevant for the Quick SolidVerify simulation.

Stock model update method

This section enables you to choose the method of Stock model updating.

Automatic

Save updated stock model for every specified number of operations: SolidCAM automatically calculates and saves the Updated Stock model. The specified number enables you to define the quantity of intermediate Updated Stock model files.

For example:

• if the specified number is 1, SolidCAM automatically saves intermediate Updated Stock model files for each operation;

• if the specified number is 2, SolidCAM automatically saves intermediate Updated Stock model files for all even operations (2nd, 4th, 6th, etc.);

• if the specified number is 0, SolidCAM does not save intermediate Updated Stock model files.

Save updated stock model for operations with a long tool path only: SolidCAM automatically estimates the time required for simulation of the operations and saves the updated stock for those operations whose tool path is considered too long.

Manual

SolidCAM enables you to manually save the updated stock model for a specific operation during the SolidVerify simulation. The simulation of the next operations can be performed on the updated stock model.

Automatically check and fix solid model integrity

During the faceting of Stock and Target models, the coordinates of facets generated by SolidCAM are often calculated as numbers of the float type with many digits after the point. These numbers cause problems during the SolidVerify simulation, such as self-intersections and gaps in model. The Automatically check and fix solid model integrity check box enables you to use a smart rounding algorithm that removes the noise in facet coordinates so that the model is displayed properly.