Choosing the tool for the Chamfer Drilling Operation

SolidCAM searches for the tool in compliance with the pre-defined tool type and angle. The search is performed in the Part Tool Library in the diameter range from the value of sum of the Hole diameter and Constant till the difference between the next segment diameter and Constant. The Constant is equal to 1.  

In case of absence of a suitable tool, SolidCAM defines a new tool with the pre-defined tool type, angle and minimum possible diameter (Hole diameter + Constant).

 

    

 

Related Topics

  1. Choosing the tool
  2. Choosing the tool for the Center-Chamfer Drill Operation
  3. Choosing the tool for the Center Drill Operation
  4. Choosing the tool for the Drill Operation
  5. Choosing the tool for the Mill Operation
  6. Choosing the tool for the Reaming Operation
  7. Choosing the tool for the Thread Operation