Turret Options

In the Options section, you can define the turret capabilities that are later displayed in the Tool parameters.

Dwell	Option to handle Device Dwell	NONE/VALUE
Activate Air	Option to handle Turret Air Coolant by GCode function	NONE, ON/OFF
Coolant Mist	Option to handle Turret Mist Coolant by GCode function	HIGH/LOW/OFF, NONE, ON/OFF, VALUE/OFF
Coolant Flood	Option to handle Turret Flood Coolant by GCode function	HIGH/LOW/OFF, NONE, ON/OFF, VALUE/OFF
Activate Air Through Spindle	Option to handle Device Air Coolant Through Spindle by GCode function	NONE, ON/OFF
Coolant Through Tool	Option to handle Turret Coolant through Tool by GCode function	HIGH/LOW/OFF, NONE, ON/OFF, VALUE/OFF
Min Quantity Lubrication	Option to handle Minimum quantity of Lubrication by GCode function	NONE, VALUE/OFF
Rotation	Option to handle Device Spindle Rotation Direction by GCode function	NONE, CW/CCW, CW/CCW/OFF
Spindles Synchronization	Option to synchronize the turret spindle with other device’s spindle by GCode function	NONE, ON/OFF
Axes Synchronization	Option to synchronize the turret axes with other device’s axes by GCode function	NONE, ON/OFF
Tool Measure	Option to handle Tool Measuring of the tool mounted on Turret by GCode function	NONE, YES/NO
Check Tool Breakage	Option to check if the Tool is damaged by measuring its radius and/or length	NONE, VALUE
Spindle Orientation	Option to handle Turret Spindle positionby GCode function	NONE, ON, ON/OFF, VALUE/OFF
Reverse	Option to rotate the turret by 180 around the motion direction	NONE, ON/OFF