The structure of the CAM-Part

External mode

The Turning CAM-Part defined in the External mode includes the following data:

  • The Turning.prt file located in the SolidCAM User directory.

  • The Turning subdirectory containing all the data generated for the CAM-Part.

SolidCAM copies the original SOLIDWORKS model to the Turning subdirectory and creates a SOLIDWORKS assembly that has the same name as the CAM-Part (Turning.sldasm). There are two major components in this assembly:

  • DesignModel.sldprt - a copy of the SOLIDWORKS model file.

  • CAM.sldprt - a file that contains SolidCAM Coordinate System and geometry data.

The Turning subdirectory also contains the files that contain the clamping fixture, stock and target geometry.

SolidCAM CAM-Part uses the assembly environment of SOLIDWORKS. This enables you to create auxiliary geometries (e.g. sketches) without making changes in the original design model. You can also insert some additional components into the assembly file such as clamping and other tooling elements.

Internal mode

When the CAM-Part is defined in the Internal mode, all geometries are stored within the CAD file. A new folder with the CAM-Part name is created in the FeatureManager Design Tree, and all CAM files are located under the folder.

 

Related Topics

  1. CAM-Parts
  2. Turning Part Data dialog box