Geometry page

The geometry for the Drill Recognition operation is defined using the AFRM functionality and is automatically recognized on the Target model, therefore the Target model must be defined in the CAM-Part before you define the operation. The hole recognition is performed in the direction parallel to the Z-axis of the Coordinate System chosen for the operation.

The definition of the geometry is performed in the HR Drill Geometry Selection dialog box.

The major steps of the HR Drill Geometry selection:

  • Choose the model configuration used for the recognition;

  • Set the selection filter options (Hole type, Hole diameter, Hole Upper level and Hole Height);

  • Perform the holes recognition and generate the recognized holes tree;

  • Choose the holes you want to include in the operation geometry;

  • Preview the machining sequence.

 

Related Topics

  1. Drill Recognition Operation
  2. Drill Recognition Operation - Levels page
  3. Drill Recognition Operation - Technology page
  4. HR Drill Geometry Selection dialog box