Turbo 3D HSR/HSM Tool Data

 The Data displays the Feed and Spin parameters that you can edit.

Feed

The Feed section enables you to define the tool feed for the Turbo 3D HSR/HSM operation.

The feed value can be defined in two types of units: F and FZ. F is the default that signifies Units per minute. FZ signifies Units per tooth and is calculated according to the following formula:

FZ = F/(Number of Flutes * S)

The F/FZ buttons enable you to check the parameter values.

Cutting Feed: This field defines the cutting feed rate of the tool.

Feed Z: This field defines the feed of the tool movements from the safety position to the cutting depth.

Retract Feed: This field defines the feed of the tool movements from the material to the retract level. The default value of the Retract Feed is calculated according to the following formula:

            Retract Feed=Cutting Feed * 2

Spin

The Spin section enables you to define the spinning speed of the tool.

The spin value can be defined in two types of units: S and V. S is the default that signifies Revolutions per Minute. V signifies material cutting speed in Meters per Minute in the Metric system or in Feet per Minute in the Inch system; it is calculated according to the following formula:

V = (S * PI * Tool Diameter) / 1000

The Gear list enables you to select a Gear producing the spinning speed. The first parameter in the parentheses is a spin range; the second parameters is the power. The gear is selected automatically according to the defined spin. Only gears having the current spin value within their range are shown in the list.

The Spin direction section enables you to choose between the clockwise (CW) or counterclockwise (CCW) direction.

Offsets

Length offset number

This parameter defines the number of the Length Offset Register of the current tool in the Offset table of the CNC-Machine.

Cutting conditions

This button enables you to update the cutting conditions defined for use of the current tool on the chosen CNC-Machine according to the parameters set in the Cutting Condition Data.