Conversion to Reaming Machinable Hole Feature segment

During conversion process, SolidCAM creates Reaming segments from suitable combinations of Cylinder and Planar Hole Feature segments. A Reaming segment is created with the following parameters:

  • hr_segm_diameter = Reaming Diameter

  • hr_segm_height = Reaming Height

  • hr_segm_upper_plane = Reaming Upper level

  • hr_segm_depth = Reaming Depth

  • hr_prev_segm_diameter = Drill diameter

 

Related Topics

  1. Conversion to Chamfer Machinable Hole Feature segment
  2. Conversion to Drill Machinable Hole Feature segment
  3. Conversion to Flat Chamfer Machinable Hole Feature segment
  4. Conversion to Flat Cylinder Machinable Hole Feature segment
  5. Conversion to Thread Machinable Hole Feature segment
  6. Machinable Hole Feature conversion
  7. Reaming recognition