Conversion to Thread Machinable Hole Feature segment

At the first stage, SolidCAM converts the Cylindrical Hole Feature segment into Drill/Flat Cylinder segment according to general conversion rules. After that, the separate Thread MHF segment is created with the following parameters:

    • hr_segm_diameter = Thread Diameter
    • hr_segm_height = Thread Height
    • hr_thread_pitch = Thread Pitch
    • hr_segm_upper_plane = Thread Upper level
    • hr_segm_depth = Thread Depth

 

Related Topics

  1. Conversion to Chamfer Machinable Hole Feature segment
  2. Conversion to Drill Machinable Hole Feature segment
  3. Conversion to Flat Chamfer Machinable Hole Feature segment
  4. Conversion to Flat Cylinder Machinable Hole Feature segment
  5. Conversion to Reaming Machinable Hole Feature segment
  6. Machinable Hole Feature conversion