Boundary machining

A Boundary machining strategy enables you to create the tool path by projecting of the defined Drive boundary on the model geometry. The Machining depth is defined relative to the model surfaces with the Wall offset parameter. The tool path generated with the Boundary machining strategy can be used for engraving on model faces or for chamfer machining along the model edges.

Related Topics

  1. 3D Constant step over machining
  2. 3D Corner offset
  3. Constant Z machining
  4. Contour roughing
  5. Hatch roughing
  6. Helical machining
  7. Horizontal machining
  8. Linear machining
  9. Morphed machining
  10. Offset cutting
  11. Parallel Pencil milling
  12. Pencil milling
  13. Radial machining
  14. Rest machining
  15. Rest roughing
  16. Spiral machining