Multi-depth Drilling Operation
Multi-depth drilling is very useful for deep hole drilling
and drilling through cross holes. In this operation, you have
full control of Drilling operations at every depth. The Multi-depth
drilling operation enables you to define manually the areas where
the feed rate changes. You can manually control the Spin rate/direction
and coolant control during the retract and engage movements.
Multi-depth drilling is a method where the drill
travels in steps to the specified depth into the work piece with
linear feed rate, rapid retracts to first level. The tool returns
back to the last drilled depth minus safety distance makes another
small cut rapid retracts again and so on until the full drill
depth has been reached.
|
The following parameters of the Multi-depth Drilling Operation are similar to the regular Drilling Operation parameters:
The Levels and Technology page has specific parameters for the Multi-depth Drilling operation.