iMachining 2D Operation

Compared to traditional 2D high speed milling strategies, iMachining 2D operations significantly reduce programming time via a super-simplified Operation definition process in combination with its knowledge-based Technology Wizard. Furthermore, every iMachining 2D operation can save up to 70% in machining time with its distinctive morphing spiral and constant load one-way tool paths.

iMachining 2D operations enable you to perform machining tasks specific to the chosen Technology type. Below the Technology type, the list on the left side of the dialog box provides a workflow for defining the operation and enables you to switch between the following parameters pages:

• Dashboard – this page provides quick access to the required and most commonly used parameters appearing on the subsequent pages (Geometry, Tool, Levels, etc.).
• Geometry – this page enables you to define the machining geometry for the operation.
• Tool – this page enables you to define the tool for the operation.
• Levels – this page enables you to define the machining levels for the operation.
• Technology Wizard – this page enables you to select from calculated sets of Cutting conditions that are optimal for your machining case.
• Technology – this page enables you to define several technological parameters such as offsets and roughing, rest machining or finishing data.
• Link – this page enables you to define the approach and retreat of the tool and the linking between tool paths.
• Motion control – this page enables you to optimize the calculated tool path according to the kinematics and special characteristics of your CNC-Machine.
• Misc. parameters – this page contains the miscellaneous parameters for the operation.